21
EN
12 / PROGRAMMING
• Delayed programme start
You may choose to delay the start of the wash
programme with this dishwasher :
Choose the desired programme by pressing
either of the
buttons.
Press button
once.
Programme the end time, in steps of 10 minutes,
using either of the
buttons.
Validate
your choice by pressing button
.
The programme end time will appear on the
display
until the programme starts. Only the
pilot light
for the selected programme will
remain on.
D
B
C
B
F
E
•
Cancelling a programme
To cancel a programme or if you have made the
wrong selection, hold down button
for a few
seconds until you hear the cancel beep.
You can then programme the dishwasher again.
D
•
Switching off the appliance
When the programme has ended, press
button
.The display
will switch off.
A
F
•
End of programme
When the programme finishes, the word ““End”
will appear on the display.
Observations :
A short beep confirms the button has been pressed (except the “On/Off” button).
Remarks :
The door’s electrical safety system can cause the indicator lights to illuminate briefly when
the door is opened or closed. This phenomenon does not affect your machine’s operation.
If required, and particularly after the water softener has been reset, the programme may start
with three minutes of resin regeneration. This is a silent operation.
45
45
45
45
45
45
45
