48
EN
3
3 // USING YOUR APPLIANCE
TURNING ON THE INDUCTION
ZONES
To use a function touch control...
Place your finger squarely on the chosen
touch control until the display shows the new
setting.
•
How do I switch on and adjust
the power?
Your hob has a heating power of 50 W to
2800 W or 3100 W (model with 1 induction
zone). 1 is the lowest setting and 15 is the
highest.
— Press
touch control to switch the
cooking plate on.
— You can
either:
-
Press
to select position
(Boiling).
-
Press
to select position
(G
ENTLE SIMMER
)
.
-
Press
or
adjust the power as
required.
The last command always has priority.
•
Programmable direct access
for either cooking zone
—
With zone turned off
, press
and hold
touch control then press the
touch control
until the desired power level is reached
(example: power level 5).
This setting is automatically validated if
nothing has been pressed for 2 seconds.
Tip
To adjust the settings faster, keep
your finger on the touch control for longer.
•
•
•
CHILD SAFETY:
•
LOCKING THE HOB
The controls may be locked:
- either when the hob is switched off
(cleaning),
- or during use (the hob continues what it was
doing and the settings displayed remain
active).
However, for safety reasons, the off touch
control will override the lock feature and cut
off the power supply to the hob.
— Press
and hold
for 3 to 4 seconds.
The display
•
(luminous dot) appears and
disappears after a few seconds. If any of the
touch controls are pressed whilst the hob is
locked, the
key symbol will be displayed.
•
UNLOCKING
— Press
and hold
for 3 to 4 seconds.
The display
•
(luminous dot) disappears.
CLEAN LOCK
—
This function allows you to temporarily
lock your hob while cleaning.
To activate
Clean Lock:
- Your hob must be turned off.
- Briefly
press
touch control.
You will hear a beep and the indicator will start
flashing.
- After a preset time, the lock will automatically
disengage. A double beep sounds and the
indicator goes out.
Tip
Remember to unlock your hob before
reusing it (see “CHILD SAFETY: UNLOCKING”).
