La DEDAccIAI si riserva il diritto di modificare
parzialmente o totalmente i suoi prodotti, le istruzioni e la
garanzia senza alcun preavviso per il cliente.
DEDAcciAi reserves the right to partially or totally change
products, prices and warranty without notice.
5.8) bRAKES
The special FLASH TT Brakes are integrated in frame and fork.
In particular cantilever TRPS brakes are positioned under the chain stay. The front
brakes are covered by the fork fairing. Serial part n°FcTTT2
Adjuster screws
Adjusting the alignment of the brakes is done by adjuster screws to adjust the tension
of the springs in the flexible areas. In the standard position the screws are completely
screwed into the frame or fork. You can achieve the right setup in the way explained
below.
Brakes are perfect aligned in the standard position. You don’t have to adjust anything.
Brakes are not perfect aligned in the standard position If the clearance between the
brake pads and the rim is not the same for both sides, unscrew the screw on the side
where the clearance is the most. Unscrewing the screw will increase the tension on
the spring causing the brake arm to move in the direction of the rim.
Springs
Together with the adjuster screws the springs make it able to adjust the tension on
the brake arms and align the brake arms in a perfect position.
