18
en
g
5.4 SEAT POST EqUIPMENT
The FLASH TT frame kit allows the custom aero seat tube of 235 gr. The seat tube
has to be insert in the frame for at least 80 mm or in any case the minimum size
shown by the constructor. Tightening is operated by an alloy expander through an
hidden alloy screw in the top tube. Plastic cover in order to avoid air turbulence.
Do not exceed 10Nm torque concerning the closing band through wrench torque.
An unnecessarily high torque creates a detrimental radial stress on the seat tube.
Seat post serial n°Rc2c.
Do not exceed the available off-set of the saddle. Saddle and seat post work properly
in the middle range. An exaggerated forward position or toward position can generate
a supplementary traction on the bolts. In case it needs a different off-set consider to
amend the saddle with an improved or modify the existing in the best ergonomic
position.
5.5) STEM
Alloy 7000 forget stem 100 length serial n°ADTT100
5.6) bOTTOM bRACKET
The bottom bracket is designed for press fit 86 alloy with a diameter of 46 mm and
width of 86 mm.
5.7) hANGER
The hanger, used for the FLASTT, is the alloy part n°FRcDFLH
OK
NO!
OK
NO!
