Instruction manual
Water treatment boiler system D 110 L
Seite 8
6 Initial operation
Establish hose connections
Shower water connection
=> shower top
Sewage suction connection
=> floor tub shower
Sewage
water =>
canalisation
Optionally connect hose to fresh water supply or fill tank manually via filling port
Connect to power supply
Adjust temperature at heating rod (the heating rod works at all switch settings of
the function switch, but not before a sensor-controlled minimum fill level is
reached)
At use of the automatic fresh water supply, the max. fill level is controlled by a float
switch
the unit is now ready-to-operate
Fine filter
Filling port
Pre filter
Fresh water supply
shower – and
sewagepump
Tank drainage
Function switch
Shower water connection
wewage water suction port
Sewage
Heating rod with
thermostat
