1
6
1.5.3. Handling the Wheelchair
WARNING
● If the wheelchair has parts that are foldable or detachable, do not operate the wheelchair
with those parts folded or removed.
● When lifting the wheelchair, do not hold movable parts.
● Do not operate with any heavy baggage hanging
over the backrest, or with any heavy objects in
the compartment. The wheelchair could easily fall
backward on an inclined slope, and may cause
you or other people around you to get injured.
● The wheelchair may tip over if it is operated with the anti-tip bar removed, folded, or with
the safety wheels facing upwards. Be sure to set the anti-tip bar correctly and operate the
wheelchair with the safety wheels in the correct position.
● Modifying the unit or its mounting may adversely affect its performance and safety.
Never make any modifications.
● Do not connect any electric instruments to the battery seat plug. This plug is to connect PC
for the Smart Tune software. Plugging other electric instruments like audio microphone or
earphones may cause unit trouble.
About the Smart Tune software, refer to section 10.
● Removing the battery while traveling causes the
brakes to be applied to the rear tires, and may
cause you or other people around you to get in-
jured.
● While the wheelchair is being operated or after op
-
eration, do not touch the back of the drive units.
During or after operation, the back of the drive
units may be hot. In addition, if the wheelchair is
near a source of heat, the drive units may become
hot.
Back of the unit
(Both side)
Back of the unit
(Both side)
