decon E-Move MEM20 User Manual Download

Page: 73 / 103

Check that the charge lamp (green) on the

charger turns on.

If the charge lamp does not comes on green,

see “8.6. Charger (ESC3) Indicator Lamps”

While charging, you can check the charge sta

tus using the capacity indicator lamps on the

battery.

The capacity indicator lamps will turn off after

charging has completed.

Assuming that charging started with the battery

in an empty state, the time to completion is typ-

ically 4.5 hours.



After charging has completed, unplug the char-

ger plug and the power plug, then securely

close the battery’s connector cover.

NOTICE

● Do not pull on the power cord. This can cause the wires to break.

Charge lamp

Charging

Charging starts

Charging

complete

All lamps turn off

Charging com-

plete

Turn on successively

Connector cover

Charger plug

Power plug

Summary of Contents for E-Move MEM20








































































































Search results

Summary of Contents for E-Move MEM20

Reviews:

Related manuals for E-Move MEM20

Brands by name

Popular brands

decon E-Move MEM20, User Manual

Search results

Summary of Contents for E-Move MEM20

Reviews:

Related manuals for E-Move MEM20

Brands by name

Popular brands