53
5
(3) Position
Adjustment
1 Loosen the 4 bolts that are securing the
controller (see the diagram above) and the
height-adjusting bolt (see the diagram at
the right).
2 Set the controller in the appropriate posi-
tion, and tighten the bolts.
Controller mounting bolt (4 bolts)
Tightening torque: 6 to 8 Nm
Height-adjusting
bolt
Tightening torque: 14 to 16 Nm
5.7.2. Swing Out Bracket
(1) Removal
(2) Installation
(3) Position
Adjustment
1 Loosen the 2 bolts indicated by the arrows.
2 Remove the controller.
1 Set the controller onto the arm.
2 Tighten the 2 bolts.
Tightening torque: 6 to 8 Nm
1 Loosen the 5 bolts shown in the diagram.
2 Set the controller in the appropriate posi-
tion.
3 Tighten the 5 bolts.
Tightening torque: 6 to 8 Nm
