24
3
(2)
Upper Holder Assembly and Controller Installation
Install the upper holder onto the controller and adjust the position.
1 Remove the bracket from the upper holder and install it onto the controller.
2 Install the bracket onto the upper holder.
Adjusting the Installation Position of the Controller (Part 1)
•
The brackets can be installed on the outside
of the holder.
•
The angle of the controller can be changed
within a 20-degree span.
Required tools: 5 mm hexagon wrench, torque wrench
Tightening torque: 6 to 8 Nm
Tightening torque: 6 to 8 Nm
Hand rest plate
Brackets
Upper holder assembly
Bracket
Holder
20°
48 mm
