23
3
3.4. Controller
Installation
(1)
Under Holder Assembly Installation
Install the under holder onto the wheelchair frame.
1 From the temporarily-assembled under holder assembly, remove the under holder
piece.
2 Mount the assembly onto the wheelchair frame. If necessary, insert the side plates
between the brackets and the wheelchair frame.
3 Attach the under holder piece.
* The illustration above is for the right-hand drive model. For the left-hand drive
model, the placement of the parts will be the opposite of the above illustration.
Required tools: 10 mm socket, socket wrench, torque wrench
8×10 mm open-end wrench, 5 mm hexagon wrench
Tightening torque: 5 to 8 Nm
Tightening torque: 14 to 16 Nm
Tightening torque: 14 to 16 Nm
For
Ǿ
19
For
Ǿ
16
<Side plates (included)>
Upper
holder
Under holder
Plate stopper
Insert it so that the anti-swivel
pin faces forward, and secure
it with the bolt.
Wheelchair
frame
Side plates
Brackets
Anti-swivel pin
