Deckma Hamburg OMD-2008, Instruction Manual

Page: 15 / 100

Page: 14 of 102
3.10 Automatic Cell Cleaning Device
The Automatic Cell Cleaning Device is a useful addition to the OMD range of monitoring
equipment. It was developed in order to facilitate the task of routine cleaning as described
in the manuals and to ensure that the measuring system of the monitoring equipment is
kept in good working order. Auto Clean System provides a truly Automatic Cell Cleaning
Device which is designed to run only when the system is on. The Auto Clean System
consists of:
a) Cylinder/ wiper piston assembly for physical cleaning of the sample cell.
b) Air Regulation Filter Unit (different makes and types may be used).
c) Auto Clean logic control with valve. It determines the frequency of the cleaning
cycles.
i
The Automatic Cell Cleaning Device does not replace the operator maintenance
schedule but can reduce the maintenance workload.
3.11 MCU (Manual Cleaning Unit)
Optionally the instruments can be fitted with a Manual Cleaning Unit. The Manual
Cleaning Unit allows to clean the Sample Glass Tube without opening the Cell Cap, and
without interrupting the normal sample flow. Maintenance is made easier with the MCU.
Please note that operating the MCU may set the instrument to alarm condition for a few
seconds.
3.12 Features
OMD-2008 Series
Features
OMD-2008 OMD-2008
EV
OMD-2008
EVA
OMD-2008
EVFC
MEPC.107(49).
   
Solid suppression capability
   
Low maintenance
   
Easy installation
   
Constant readiness
   
Low spare part stock holding
   
Easy settings via menu
   
Works adjustment
   
Electric Valve
   

FW Remote Control
   
Auto Clean System
   
MCU (
optional
)
   
Robust Construction


  
Electrical Monitoring of
Desiccator
   
Automatic Voltage Selection
   
Table 2