background image

25

G

ENESIS

-VP™: User’s Manual

9. Warranty

T

WO

 Y

EAR

 R

ADAR

 W

ARRANTY

Decatur Electronics, Inc. guarantees the Genesis-VP™ to be free from
defects in workmanship and material, and to operate within specifications for
a period of two years. During this period, Decatur Electronics, Inc. will
repair or replace, at its option, any component, except batteries or chargers,
found to be defective, without cost to the owner, provided the unit is returned
to the factory.

The full warranty on parts and workmanship does not include normal wear
and tear, crushing, dropping, fire, impact, immersion, or damage from
attempted repair or modifications by unauthorized service agents.

Simply return the unit (transportation prepaid) directly to the factory or to an
Authorized Decatur Electronics Warranty Service Center near you.

If you have any questions, or want a quick problem diagnosis, please call our
customer service hot-line and ask for the service department:

phone:

1.800.428.4315

fax:

1.217.428.5302

T

WO

 Y

EAR

 W

ARRANTY

 E

XCEPTION

If the unit was purchased under a special buying program (state purchase
contract, etc.), then the above warranty may not apply. Please refer to the
buying program contract for the appropriate warranty terms, or contact
Decatur Electronics, Inc. at the above phone number.

E

XTENDED

 W

ARRANTY

 O

PTIONS

If you are interested in an extended warranty, contact your sales
representative to discuss extended warranty options.

Summary of Contents for GENESIS-VP



































Reviews: