manualshive.com logo in svg

Decatur Electronics GENESIS-VP, User Manual

Share
Download
Decatur Electronics GENESIS-VP User Manual Download Page 14

G

ENESIS

-VP™: User’s Manual

14

3. Displays

3.1

Number Segments

Left side: Three large digits
(888) display speeds and menu
categories.

Right side: Three small digits
(888) display speeds and
“select” values.

Displayed speed will be the
strongest signal, or, in fastest
mode, the next strongest signal
that is also going faster than the
strongest signal.

3.2

Status indicators (icons)

POWER

Indicates that power is on.

RFI

Indicates that there is radio frequency interference inhibiting the proper
operation of the unit. No new speeds will be displayed or transmitted via the
serial port while this icon is active. Locked speed will remain. Once the
condition no longer exists, the unit will operate properly. Possible causes of
this condition are patrol vehicle FM communications, proximity to radio
stations and other broadcast equipment.

LOW BAT

Indicates that the batteries need to be recharged. No new speeds will be
displayed or transmitted via the serial port while this icon is active. Locked
speed will remain.

LOCK

Indicates that the speed displayed in the secondary window is a stored value
that was previously displayed in the primary display window.

POWER      RFI      LOW BAT      LOCK      FAST

                                                                          MPH

XMIT     HOLD    ERROR                                  KPH

Figure 7:

Number Segments and

Status Indicators

Summary of Contents for GENESIS-VP



































Reviews:

No comments

Brands by name

Popular brands

Load more brands