DEC DECrepeater 90T, Owner'S Manual

Page: 25 / 62

4
Management
Managing the DECrepeater 90T
The DECrepeater 90T is managed on-line using a DECbridge 90 in a
DEChub 90. All commands that affect the DECrepeaters are part of the
DECbridge 90 command set.
Functions
On-line management allows you to perform the following functions on the
DECrepeater 90:
• Identify all repeaters in the DEChub 90.
• Examine port status (enabled, disabled, properly operating, or
inoperative) of repeater ports that share the DEChub 90 backplane
with a bridge.
• Examine the work group address database entries 1 to 200, annotated
with the repeater port to which each is attached, if any.
• Reset any repeater in the DEChub 90 backplane.
• Enable or disable a repeater port.
• Define the bridge password.
Refer to the section Command Descriptions, in this chapter, for additional
information on command syntaxes.
Digital Internal User Only 17