DEC DECrepeater 90T, Owner'S Manual

Page: 30 / 62

22 Management
A hub slot number is either one of the following:
• A single number ranging from 1 through 8 that identifies a hub slot
containing a DECrepeater 90
• A pair of numbers, the first being the hub number of 1 through 2, and
the second the slot number within the hub of 1 through 8, when two
DEChub units are connected together. For example:
In the pair of numbers 2,4, the fourth slot from the left in the second
DEChub is designated. This is the hub that does not contain the
DECbridge 90.
A password string is a string of up to 16 characters.
A port number is either a DECbridge 90 port, or the number of a port on
a DECrepeater installed in the DEChub backplane with the bridge. The
DECbridge backbone port is the single digit 1. The work group port is 2.
A repeater port is identified by a hub slot number as described above, and
the port number within the slot of 0 to 8. For example, 2,4 designates
the fourth port on a repeater in slot 2, in the same hub as the DECbridge
90, and 2,4,1 refers to the first port on a repeater in the fourth slot of the
second hub.
Command Descriptions
DEFINE BRIDGE HUB_MANAGEMENT DISABLE
SET BRIDGE HUB_MANAGEMENT DISABLE
Disables all repeater management through the DECbridge 90 unit for
DECrepeater 90 units in the DEChub 90 backplane. When disabled,
you receive an error message with the SHOW REPEATER, SET PORT,
or SHOW PORT commands on repeater ports. You do not receive port
number information from the SHOW ADDRESS command.
DEFINE BRIDGE HUB_MANAGEMENT ENABLE
SET BRIDGE HUB_MANAGEMENT ENABLE
Reverses the affect of the SET or DEFINE BRIDGE HUB_
MANAGEMENT DISABLE commands.
Digital Internal User Only