Page 62 of 68
INDUSTRIAL PUMPS
www.
debem.com
Chapter 8 - Decommissioning and Disposal
Translation of Original Instructions - BOXER rev.
2021
8.1.3
PUMP STORAGE
The pump must be stored in a suitable packaging, in a closed and protected environment at temperatures
ranging from 5°C to 45°C, and a humidity level not above 90%.
BOXER pumps are not self-draining; turn the pump upside down to completely drain the residual washing
liquids from inside.
To store, proceed as described in
Section 4.1 STORAGE AND PRESERVATION
.
CAUTION
:
risk of contamination, injuries and/or harm to health.
Should the pump be stored or returned to the Manufacturer or to an Authorised Assistance Center, it must
first be emptied of the product and/or any detergents. If toxic, noxious or other types of health harming
products have been used, the pump must be suitably treated and washed and then emptied before it is
stored or sent.
The pump decommissioning is completed.
8.1.4
PUMP WASHING FORM
Before returning the pump to the Manufacturer for any maintenance or as returned goods, it is always necessary
to thoroughly wash the product circuit to remove any residual contaminants and chemical agents and then
empty it.
BOXER pumps are not self-draining; turn the pump upside down to completely drain the washing liquids from
inside.
Delivery of the washed and emptied pump to the Manufacturer must always be accompanied by the
“Pump
Washing Form”
(see pages below), duly completed and signed by the Manager who certifies the effective
decontamination from all possible toxic, irritant and polluting agents it came into contact with.
CAUTION
:
risk of contamination, injuries and/or harm to health.
Failure to submit the “Pump Washing Form” duly completed and signed will not allow for adequate treatment
in compliance with current safety regulations and does not authorise the Manufacturer to accept the goods
even on consignment.
