Dea 224RR, Operating Instructions And Warnings

Page: 25 / 68

2 2 4 R R
Operating instructions and warnings
23
Time of automatic closing (expressed in sec). If = 0 the automatic closing is deactivated Time of pre
-flashing (expressed in sec)
Time
of
phase
displacement
in
opening
(expressed
in
sec)
A
TTENTION
:
if=0
the
exit
which controls the electric lock is automatically deactivated Time of phase displacement in closing (expressed in sec) Collectivity
function:
if
it
is
activated
it
deactivates
both
start
and
pedestrian
inputs
for
the whole duration of automatic opening and closing
deactivated activated
Ram
blow
function:
if
it
is
activated,
it
pushes
the
motors
close
for
one
second
before
each opening movement, so as to ease the releasing of any electric lock
deactivated activated
Operating program: reversal (start
->open, start
->close, start
->open ...),
st
e
p
-b
y-
step (start
->open, start
->stop, start
-close...)
inversione step
-by
-step
PHO
TO
input
functioning:
if=0
photocells
are
activated
while
closing
and
at
start
when
gate
is
closed;
if=1
photocells
are
always
activated;
if=2
photocells
are
activated
while
closing
only
.
PHO
TO
input
activation,
when
activated,
provokes:
the
inversion
(while
closing), the stop (while opening) and prevent the starting (when gate is closed).
photocells
are
activated
while
closing
and
when
gate
is
closed
ph
ot
oc
el
ls
ar
e
al
w
ay
s
ac
tiv
at
ed
fo
to
ce
lls
a
re
a
cti
va
te
d
at
c
lo
sin
g
on
ly
Clean contact operation: -
If
=
0,
open
gate
fixed
warning
light,
the
contact
is
always
closed
when
the
gate
is
moving or opened, it opens again only when the closing movement is completed -
If
=1,
open
gate
intermittent
light,
the
contact
is
slow
while
opening
and
fast
while
closing
,
always
closed
when
the
gate
is
opened,
it
opens
again
when
the
closing
movement is completed -
If>1
courtesy
light,
the
contact
is
closed
during
every
movement,
it
opens
again
when
the motor stops according to a pre
-settable delay (expressed in sec)
open gate fixed warning light open gate intermittent warning light
>
courtesy light with settable delay
-off
Short
reversal
at
end
of
stroke:
when
each
leaf
reaches
the
end
of
stroke,
it
reverses
shortly
the
movement
so
as
to
“release”
the
mechanical
stress
due
to
the
leaf
’s
pressure
on the end of stroke itself
.
deactivated activated
One motor function: if it is activated, the control board controls motor 1 only ATTENTION
: activate this function before memorizing motor
’s stroke.
ATTENTION
: When 1 motor is working (P029=1) set P022=0
deactivated activated
Searches
for
end
of
stroke
while
opening:
when
activated,
operators
stop
only
at
their
arrival
et
the
end
of
stroke.
If
deactivated,
operators
stop
on
the
point
memorized
during
the
learning
procedure.
Its
activation
assures
a
complete
opening
even
in
the
presence of the operator inertia and/or in case of many inversions during the stroke.
deactivated activated