2 2 4 R R
Operating instructions and warnings
18
8.3
Built-in radio receiver ————————————————
DEA 224RR control board includes a 433,92MHz built-in radio receiver accepting both transmitters with
HCS coding (complete rolling code or just fixed part), and HT12E dip-switch coding.
• The type of coding is selected by programming the working parameter n° 8 “type of coding” (see Table
2 Parameters)
• The receiver memory capacity can contain up to 100 different transmitters.
• When receiving a pulse from the transmitter, depending on your channel selection and linking, the start or
the pedestrian inputs are activated. In fact, by programming one of the working parameters it is possible
to choose, according to one’s needs, which key of the memorized transmitters will activate the start input
and which one will activate the pedestrian input (see “4. Channel selection and linking on the transmitter”).
• While you memorize each transmitter the display shows a progressive number by which you will be able
to trace and, if necessary, delete each transmitter individually.
Instructions
Function
Display
The control board is ready to receive instructions
Deletion of all transmitters
Scroll down the parameters until you visualize P004
Confirm! The control board awaits a further confirmation
Confirm by pressing on the OK key for a few seconds! The procedure starts
Done! The transmitters memory has been deleted
Scroll down the parameters until you visualize “----”. The control board awaits a
further confirmation
Memorization of transmitters
1
Scroll down the parameters until you visualize P005
Confirm! The receiver enters in memorization mode
the flashing light flickers!
Press on any key of the transmitter
Memorization done! The flashing light goes out for 2 seconds the display
visualizes the number of the transmitter just memorized (es. “r001”)
The receiver reverts automatically to memorization mode
The flashing light flickers!
Memorize all necessary transmitters
Wait 10 seconds before quitting the memorization mode
The receiver will now receive all the memorized transmitters
How to activate the memorization mode without operating on the control board
1
Press simultaneously on key CH1 and CH2, or on the hidden key of a
transmitter already memorized
How to search and delete a transmitter
Scroll down the parameters until you visualize P006
Confirm! You can now select the transmitter
Scroll down the transmitter numbers until you reach the transmitter to be
deleted (eg. “r003”)
Confirm the deletion by pressing the OK key for a few seconds
OK! The transmitter is deleted
You can now select the parameter
Scroll down the parameters until you visualize “----”. The control board awaits
further instructions
Summary of Contents for 224RR
Page 1: ......
