3.
Adjustment/Test
A.
General
(1) The maintenance procedure that follows is to make sure that the fuel flow indicators
operate correctly. The test procedure includes the operational test of the fuel flow
indicator.
B.
Operational Test of the Fuel Flow Indicator
WARNING:
MAKE SURE THAT ALL PERSONS IN THE AREA OF THE
AIRCRAFT ARE TOLD BEFORE THE ELECTRICAL SYSTEM IS
ENERGIZED. IF YOU DO NOT DO THIS, YOU CAN CAUSE
INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(1) Apply electrical power to the aircraft (refer to AMM 12−00−05).
(2) Push and hold the test button on the indicator. Make sure that:
–
The pointer moves to the blue dot on the indicator face.
–
The digital display of the indicator reads 1050.
(3) Release the test button. Make sure that:
–
The pointer of the indicator moves to zero.
–
The digital display of the indicator reads 0000.
(4) Remove the electrical power from the aircraft (refer to AMM 12−00−05).
D
SERIES 100
AIRCRAFT MAINTENANCE MANUAL
MASTER
EFFECTIVITY: See Pageblock 73−32−00 page 201
73−32−00
Page 206
Jan 15/2010