DDS CALORIMETERS OPERATIONS MANUAL V1.1
2022
Website:
www.ddscalorimeters.com
51
Digital Data Systems (Pty) Ltd.
CAL3K Advanced Bomb Calorimeters
www.ddscalorimeters.com
19
CALIBRATION
0
A DEMO calibration results in a calibration record, which is added to the vessel (and mode) calibration
memory.
NOTE: Before this vessel can be used for real operations the calibration memory must be cleared!
The demo results may vary significantly depending of what calibrations are in memory. The calibration
memory can hold 15 calibrations. The type can be:
Real calibrations (performed before shipment)
Simulated calibration (By CMD=20, + CMD=19)
Demo calibrations (CMD=108)
The unit doesn’t differentiate between them, but the data are different and flagged.
28.7
SIMULATING AN OVER-PRESSURE RECORD
This command applies to the
CAL3K-AP only
. It simulates a pressure event record in memory. See
‘PRESSURE’ section for details.
126
SIM PRESS RECORD 1
29
SETTING A STATE
This section groups all commands which set a state:
ON
OFF
HIGH
LOW
ENABLE
DISABLE
The entry to these commands is indicated below.
28
SET CAPSULE EN. 0
Enter Yes if EASY SPIKING is used. See: SPIKING for details
55
SET FILTER C, F 1
Enter ‘C’ to filter calibrations and ‘F’ to filter faulty results from printing. See: Printing for details.
60
SET RTHEAD EN CP 1
This command applies to the
CAL3K-AP/A/F
units with real time (RT) printing. Enter ‘C’ for customer
header and ‘P’ for parameter header. See: REAL TIME OUTPUT for details.
