DDS CALORIMETERS OPERATIONS MANUAL V1.1
2022
Website:
www.ddscalorimeters.com
22
Digital Data Systems (Pty) Ltd.
CAL3K Advanced Bomb Calorimeters
www.ddscalorimeters.com
11.10
READ RESULT
This command is required to read the previous stored results. The ‘last one first’ result can be retrieved
by:
50
READ MEMORY RESULT
0
The unit displays the Last result number and the result details in line #4.
Press
ENTER
to display the result before the last
The result can be printed with the
F8
function key
11.11
ABORT
The abort (Reset) commands terminate the present operation. The exact sequence depends on the type
of unit and safety measures.
It will deflate the vessel
(CAL3K-AP)
It will write a terminated result in to the memory and print it if enabled
It will not save a calibration
It will open the lid
(CAL3KAP/A/F)
The ABORT is the same as a RESET. It can be performed at any time.
12 ABORT/RESET 0
This command clears everything. It terminates any of the operational cycles such as INITIAL or MAIN.
Data is lost. However, if a MAIN cycle was terminated then a record is stored with the appropriate
status.
124 RESET 0
The same as ABORT. Any process is terminated. A Sample in progress is lost, Balance mass is lost.
11.12
UNITS OF MEASURE
The unit works in KJ/g and Centigrade. However, the CV value can be expressed in other units of
measure by:
22 UNIT: KJ,KCA,KBU 1
This command sets the measuring units. Note that the internal working are in KJ/g, but any output is
converted to the units. Enter:
KJ
KJ/g, MJ/Kg
KCA
KCAL/g
KBU
KBTU/lb
