DCS AERGES MIRAGE F1, Flight Manual

Page: 78 / 132

DCS: Mirage F1 Flight Manual Version 1.0
78
Radar indicator scope
The radar indicator scope includes:
- The radar scope where the radar data is displayed.
- The radar status lights:
AP Amber parametric amplifier disabled
TCH
Red
too hot
EMI no emission
PNE failure
- The amber lights 7, 15, 35, 60 that indicate the scale in use.
- The function indicators:
HA
Amber
high altitude
IC short pulse
TL
Green
AIR-AIR telemetry
BZ scanning by area
TS AIR-GROUND telemetry inoperative
V1
Amber
visualization of the ground
V2
inoperative
DC iso-altitude cutout
PR blind penetration
AC anti-collision
DB jammer detection
The "HA", "IC" and "V1" functions are selected by the radar indicator scope function selector.
- The alphanumeric display for visualizing the difference in altitude:

E or D : E for elevation, D for altitude difference

+ or - : the + sign corresponds to a plane above the airplane

2 digits : always indicating the difference in altitude. The displayable domain is:
± 48,000 ft in 1,000 ft steps in AIR-AIR modes
± 4,800 ft in steps of 100 ft in display
- The controls at the bottom of the indicator, from left to right:

TEST : button for launching a test sequence

LUM : adjusting the brightness of the scope

Function selection

REM : adjustment of the remanence

EFF : erase button, resets the screen to black level
- The polaroid control, at the scope periphery, allowing to modify the background of the scope
according to the ambient luminosity