DCS AERGES MIRAGE F1, Flight Manual

Page: 63 / 132

DCS: Mirage F1 Flight Manual Version 1.0
63
- IDN test pushbutton: Tests that the navigation indicator works correctly. The big needle
should move to 45° and the distance counter should show 250 NM.
- IDN Normal/Additional vector switch: commands the wide needle and distance counter
to show info relative to the TACAN station or to the tip of the additional vector.
- Additional vector selector: allows to input the polar coordinates of the additional vector
in relation to the TACAN station.
Indicators
- Emergency gyroscope sync state needle: displays the error of the emergency gyroscope.
- TACAN selected channel.
- VOR/ILS selected frequency.
- Navigation indicator (IDN): see table in description.
- Additional vector length display: shows the selected length of the additional vector (in
NM).
- Additional vector angle display: shows the heading of the additional vector.
1 POLE SETTING AND MARKER BEACON
LIGHT TEST
2 ILS (GS) POINTER
3 ROLL SCALE
4 FAILURE WARNING FLAG
5 SIDESLIP BALL
6 DAY/NIGHT SELECTOR SWITCH
7 ROLL INDEX
8 TACAN-VOR-ILS (LOC) POINTER
9 AIRCRAFT MODEL
10 TO-FROM INDICATOR
Figure 3-85 Spherical Indicator
1 AIRCRAFT MODEL
2 ROLL SCALE
3 UNCAGE AND AIRCRAFT MODEL
CONTROL
4 ROLL INDEX
5 CAGING AND FAILURE WARNING FLAG
Figure 3-86 Standby Horizon
6
1
4
2
9
7
5
8
3
10
5
4
1
2
3