DCI DigiTrak Falcon F5 iGPS, Supplement Manual

Page: 9 / 15

D
IGITAL
C
ONTROL
I
NCORPORATED
DigiTrak Falcon F5 iGPS Supplement A 6
White Lining (WL)
Turning on WL and marking features at the drill site is just like removing the cap from a marker and drawing
on a map, with the added bonus of being able to store White Lines and adding them to your Log-While-Drilling
(LWD) report or overlaying any number of them on a map of your bore. It does not use DigiTrak transmitter
data. To get started with WL, toggle up once (or down three times) in the Main menu and select
White
Lining .
White Lining on Main Menu
White Lining Menu
The White Lining menu is very close in appearance and function to the DataLog menu.
1. Set up White Line Job
2. Upload White Line to PC
3. Delete White Line Job
4. View or Delete White Line
Flags
5. Exit
White Lining Menu
Since White Line jobs are saved on the Falcon F5 receiver independent of DataLog jobs, it is important to
make note of which WL is related to which DataLog job. The files are merged when you
import (see page 9) a
White Line into an existing DataLog job in LWD on a computer. Using White Lines requires LWD version
3.04 or later.