DCB, Inc.
2949 CR 1000 E
Dewey, Illinois
61840
217.897.6600 Tel
800.432.2638 Toll Free
217.897.1331 Fax
www.dcbnet.com
Step One, setting up the card mode for 56 Kbps or 64 Kbps operation:
The 8DBRA card can be set to over sample at either 56 Kbps or 64 Kbps. All 8 ports share the
same sampling rate of either 56 Kbps or 64 Kbps. After the card is changed from one rate to the
other, it is necessary to reset the card.
When the 8DBRA card is reset, all card mapping is set to default (no mapping). The card reset
takes about 50 seconds to complete. Be patient.
Below are the screens showing the “M Mode Setup” selection, the 56/64K selection.
→
SLOT 5 8DBRA P1 === Port Menu === 13:51:15 04/03/2011
Version : SW V1.02.01 03/31/2011
HW Ver.B FPGA Ver.B
Backup Mode: NO (64K)
[DISPLAY] [SETUP]
T -> Port Map Configuration
M -> Mode Setup
C -> RS232 Configuration B -> Backup Setup
K -> Port Map Setup
S -> RS232 Config Setup
G -> Upgrade Firmware
SLOT 5 8DBRA P1 === Mode Setup === 13:51:30 04/03/2011
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Mode: 64K
Note: Change Mode will reset card
Card reset celars all 8DBRA card mapping (8DBRA ports and time slots to Virtual Ports). The
reset process takes a bit less than one minute.
Page 3
