DCB, Inc.
2949 CR 1000 E
Dewey, Illinois
61840
217.897.6600 Tel
800.432.2638 Toll Free
217.897.1331 Fax
www.dcbnet.com
In the example below, RS232 ports 1 and 2 each have 2 time slots mapped. RS232 Port 1 is
mapped to VP1, RS232 Port 2 is mapped to VP2. Alternatively, both RS232 ports could be
mapped to VP1, where RS232 Port 1 uses VP1, Time Slots 1 and 2, RS232 Port 2 could use VP1,
Time Slots 3 and 4 (or any other, but consecutive time slots are easier to track.
SLOT 3 8DBRA P1 === Port Map Setup === 16:38:15 12/01/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
[Setup]
Virtual Port: P1
TS start : 01
Total TS : 01
RS232 Port : 1
Command : Set
[Display]
Port TS: 1 9 17 25 32
VP1 MAP: 11
iiiiii iiiiiiii iiiiiiii iiiiiiii
VP2 MAP: 22
iiiiii iiiiiiii iiiiiiii iiiiiiii
VP3 MAP: iiiiiiii iiiiiiii iiiiiiii iiiiiiii
Note: i=idle, 1~8=RS232 port number
Map the Virtual Ports VP1 and VP2 shown above to the appropriate T1 DS-0s that go out to the
remote locations. The map below has VP1 mapped to the Quad T1 Port 1, time slots 1 and 2.
LOOP AM3440-C === System Setup (MAP) === 16:48:13 12/01/2010
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
MAP NO: MAP_1
Target 8BDRA Source
Target PO/TS D SL/PO TS PO/TS D SL/PO TS PO/TS D SL/PO TS PO/TS D SL/PO TS
Slot : 3 ===== ========== ===== ========== ===== ========== ===== ==========
Port :
1 1 d 1 1 1
17 d
T.S. : 01
1 2 d 1 1 2
18 d
3 d 19 d
4 d 20 d
T.S.# : 1 5 d 21 d
Clear : No 6 d 22 d
d/v : d 7 d 23 d
8 d 24 d
9 d 25 d
Source 10 d 26 d
Slot : 1 11 d 27 d
Port : P1 12 d 28 d
T.S. : 01 13 d 29 d
14 d 30 d
Confirm?Yes 15 d 31 d
16 d 32 d
<< Press ESC to return to Controller Setup menu, then Press D to active >>
Page 11
