Setting
7
or you have lost it, please check with your
network service provider for the code.
Change Barring Code
Change the network access code (password) for call
barring. Check with your network service provider for
the password.
Time & Cost Settings
You may set the handset to provide some certain
calling information.
Calling Display:
This option provides information on call durations,
call cost or both, during calls.
Charge Rate
Your handset will display the call cost according to
the number of units, the charge rate per unit, the
currency, and the exchange rate. Please check with
your network service provider for the current rate
and currency. The PIN2 code is required for setting.
Cost Limit
You may set the limit of your call cost. The PIN2
code is required for setting.
Short Cut Key
You may set the quick access function to the four-
ways navigation key for effective operation.
1.
Scroll to the desired navigation key and press
.
2.
Scroll to the required option and press .
3.
Return to idle mode, press the key assigned,
the handset will lead you to the required menu
directly.
Irda Settings
This option allows you to transfer the data to your
PC via infrared light. Press to activate the Irda
function.
Note
Don’t point at eyes with infrared ray or interfere with
other infrared equipment. The device is the 1st class
laser light.
1.
Ensure that the two infrared devices are put
port to port without barrier between them.The
interval between the two infrared devices is
limited to one meter.
2.
The receiver must startup the infrared port.
3.
The Irda will be closed if no other infrared
devices are detected in 2 minutes.
4.
The IR connection will be closed if you haven’t
begun transmitting data within 2 minutes of the
IR port being opened.
5.
The IrDA will be closed if the handset is moved
away from the detectable area in 2 minutes
when the IrDA link has begun.
6.
The IrDA will be closed if the handset is moved
away from the detectable area in 16 seconds
56
Summary of Contents for J6
