DBTEL J6, User Manual

Page: 65 / 83

WAP 9
WAP
WAP (Wireless Application Protocol) is a global
wireless protocol specification for mobile wireless
terminals. WAP enables you to subscribe to certain
Internet services, for example: banking services,
news, weather forecast, flight schedules etc.
Note
You need to subscribe to the data transmission and
WAP browsing services via your service provider in
order to access WAP services.
In idle mode, proceed as follows:
1.
Press to enter the main menu.
2.
Scroll to “WAP” with .
3.
Press to access the menu.
Basic steps for activating and accessing WAP service
The following section introduces the basic steps for
accessing and browsing the web.
Activation of WAP service
Before using the WAP service, you need to activate
the WAP connection profile first.
1.
Scroll to “WAP Settings” with and press
.
2.
Select the desired profile with and press
.
3.
Scroll to “Activate” and press .
Accessing the WAP service
You may connect to the Web in either of the
following ways.
Accessing via the homepage
1.
Scroll to the “WAP” menu and press .
2.
Scroll to “Homepage” and press .
Accessing via the bookmark
1.
Scroll to the “WAP” menu and press .
2.
Scroll to “Bookmarks” and press .
3.
Scroll to the desired bookmark and
press .
4.
Scroll to “Go” and press to start connection.
Note
If the selected bookmark is not available as desired,
select another profile and perform the procedures
described in “Activation of WAP service” again.
Accessing via navigation
1.
Scroll to the “WAP” menu and press .
2.
Scroll to “Navigation” and press .
3.
Enter the URL of the Website (Use ,
or to key in the special character).
4.
Press to link to the web page.
Note
You may skip over the prefix of the URL (i.e.
http://).
61