Clock
6
Clock
This menu shows the options for setting the alarm,
date and time, display mode (display the date and
time on the LCD display), time zone, auto power off
and calendar.
In idle mode, proceed as follows:
1.
Press to enter the main menu.
2.
Scroll to “Clock” with
.
3.
Press to access the menu.
Alarm
Sets the handset to ring at a specific time with the
desired ring tone.
1.
Scroll to “On” and press .
2. Scroll to either of the following to continue setting.
Time Setting
1.
Key in the time for the
alarm using the HH:MM
format, where HH is for hour and MM is for
minute.
2.
Press .
3.
Scroll to either “Once”, “Everyday” or
“Workday” and press .
Alarm Ringer
Sets the ring tone for alarm.
Alarm Volume
Sets the volume level of the alarm.
Note
When the alarm goes off, press any key to turn off
the alarm. If no action is taken, the alarm will turn
into snooze mode and ring every 3 minutes
3 times.
Date Setting
Sets the appropriate date for the phone using the
following format YYYY/MM/DD; where YYYY is for
year, MM is for month and DD is for day.
1.
Key in the appropriate year, month and day to
replace the factory set date.
2.
Press to save the setting.
Note
You will be asked to reset the date if the battery has
been detached for an extended period upon you
switch on your handset.
Time Setting
Perform the procedures described above for time
setting using the format HH:MM, where HH is for
hour and MM is for minutes.
Note
You will be asked to reset the time if the battery has
been detached for an extended period upon you
switch on your handset.
Display Mode
You may set the time format for the LCD display.
49
Summary of Contents for J6
