Http://www.dbltek.com VP-102 / VP-202 User Manual
31
2.4.4 Phone Settings
The Phone Settings page configures the FXS port and its related operations. They are described in details
below.
1.
Title on LCD
– The text entered here is shown on the LCD as a default message when the phone is
idle.
2.
Auto Dial
– This field enables a number entered to be dialed out automatically once the
Auto-Dial
Timeout
expires.
3.
Auto-dial Timeout
– The field specifies the timeout duration (in second) for automatically dialing out
the number entered.
4.
Hotline (VP-102)
– This feature enables the phone to dial out the
Hotline Number
entered
automatically whenever the phone goes off hook.
5.
Dial Plan (Digit Map)
– Dial Plan defines how a number (VoIP) is processed when the device
receives it. This field is located in the Calling Setting Window and it is available for both H.323 Phone
and SIP Phone. The Dial Plan is very flexible and can be configured for a wide range of dialing
applications.
The basic syntax is “<
event
>:<
action
>|<
event
>:<
action
>|…”, where
<
event
> defines the event to be matched. A event consists of a sequence of digits. If a specific digit
has a limited range, use the syntax [A-B] where A and B are both digit (0 to 9) and B is
greater than A. The length of the input number can be limited by using “X” to represent each
unknown digit. If this field is omitted, it means any event.
<
action
> defines the action to be taken on the number received and it consists of “–“ (minus), “+”
(plus), and digits. “-“ followed by digits means to remove the digits from the beginning of
the number entered. “+” followed by digits means to add the digits in front of the number
entered.
“
|
” means or and the order of priority is from left to right.
