DaytonAudio DSPB Series, User Manual

Page: 34 / 47

H. Output Section – This section is configured with the assumption that you are using a DSPB-100
as your subwoofer and your KAB board for your satellites. DAC0 is the output from the DSPB-
100 (or DAC1, but we use DAC0 in this case), and DAC2 and DAC3 are the outputs from your
attached KAB board.
I. Example – DSPB-K + DSPB-KE – 3-Way Crossover
This example demonstrates how you can utilize 2 sets of DSPB-K/KE to achieve a 3-way crossover for a
stereo set of speakers. Instead of using the DSPB-K/KE as DSP for left, right, and sub, you can reprogram
the boards in SigmaStudio and achieve a 3-way crossover by using the connections below and a sample
project that is also described below. Instead of using the DSPB-KE for left, right and subwoofer signals,
you instead use them for tweeter, mid-woofer, and woofer signals. Eliminating the need for assembling
complicated crossover circuits, a 3-way crossover can be achieved in a small form factor and changed in
real time with SigmaStudio.
Required Items
:
Item Needed Quantity for mono Quantity for stereo
Dayton Audio DSPB-K 1 2
Dayton Audio DSPB-KE 1 2
Dayton Audio Dayton Audio ICP1 1 1
Micro USB Cable and a 5V power
supply. Because of the USB connection,
this could be a laptop, TV, dedicated
power brick or anything else. If you
experience issues, it’ s recommended to
use a dedicated USB power brick.
1 Usually 2
1 x Stereo Amplifier with RCA or 3.5mm
inputs 1 2