DaytonAudio DSPB Series, User Manual

Page: 17 / 47

DAC Assignment Table
DSPB-250 DSPB-100 DSPB-KE
DAC0 J10 J10 OUTR
DAC1 J10 OUTL
DAC2 J3 or J5 J3 or J5 N/A
DAC3 J3 or J5 J3 or J5 SUB
3. It is recommended to add hardware-controlled gain on any project. There are multiple types of
volume controls, but for this tutorial we will use a control that can be controlled with one of the
onboard potentiometers
. From the tree toolbox, find “Single slew ext vol” under Volume
Controls > Adjustable Gain > Ext Control > Clickless SW Slew. Drag this item into the schematic
whitespace.
4. Right click the SW vol 1 control, and grow the algorithm by 1 like shown below. This will allow us
to pass both input 0 and input 1 through the same volume control by adding an additional input
and output.