DaytonAudio DSPB Series, User Manual

Page: 31 / 47

Filters > Second Order > Multichannel allows for visual adjustment of filters and is what we use
here as it is the most user friendly, but there are many other ways to achieve EQ. Click the blue
icon in the block
to adjust the PEQ.
a. Note: You might need to reflash your board by hitting the “Link Compile Download”
button to hear the results of adding a new filter in the PEQ mode.
b. Results with this PEQ can be dramatic. Take caution to avoid overloading speakers.
c. Warning – Read the warning at the beginning of section 3 about this block.
D. Crossover Section – This section is preconfigured for our test speakers, but it is fully
customizable by clicking the blue icon in the block . This will bring up the appropriate menu
that can be seen below
E. Output Section – This section is configured with the assumption that you are using a DSPB-100
as your woofer and your KAB board for your t midwoofer. DAC0 is the output from the
DSPB-100 (or DAC1, but we use DAC0 in this case), and DAC2 and DAC3 are the outputs from
your attached KAB board. Chang
e this section accordingly if you’re using a DSPB -250 with a
mono KAB board instead.