2021/06/21
80458 PAGE 4/9
Installation procedures
The following procedures are omitted from this manual. Please have the work done by a knowledgeable
and experienced person.
Remove the crankcase gasket.
Clean and inspect the disassembled parts.
If you find any damaged or worn parts, replace them with new ones.
Perform the necessary work before assembly.
OIL
OIL
OIL
#3. CRANKSHAFT ASSY.
#26. STUD BOLT A (197mm)
#27. STUD BOLT B (209.5mm)
#19. GASKET, CRANKCASE
STOCK
STOCK
#9. CAM CHAIN
1. CRANKSHAFT / CRANKCASE
LOCK
11N-m
LOCK
11N-m
Replace the cylinder stud bolt on the crankcase.
Apply a sufficient amount of oil to the crankshaft.
Install the crankshaft into the crankcase.
<Assembling the gearbox>
<Assembling the crankcase>
Put the cam chain on the crankshaft.
