2021/06/21
80458 PAGE 6/9
#1. CYLINDER HEAD ASSY.
STOCK
#17. GASKET, CYLINDER HEAD
#25. PIN, DOWEL 8X14 (2)
#33. NUT M6
#32. CAPNUT, FLANGE M6 (4)
12N-m
8N-m
#35. WASHER, SEALING 6mm (4)
#34. WASHER, SEALING 10mm
#12. BOLT, M10
#11. UNION, 8mm (for BREATHER)
12~15N-m
#30. SET SCREW, HEX SOCKET (2)
10N-m
Tighten after tightening the cylinder head cap nut
Tighten after tightening the cylinder head cap nut
<When tightening the flange cap nut, tighten it in diagonal order.>
3. CYLINDER HEAD
LOCK
10N-m
Install the set screw on the exhaust flange of the cylinder head.
Set the dowel pin (8X14) in the dowel pin hole on the cylinder.
Install the cylinder head gasket.
Install the cylinder head assembly. Put the M6 nut on the stud bolt installed on the cylinder.
Install the cylinder head assembly using the sealing washer and flange cap nut.
Tighten the M6 nut next to the cylinder head and the bolt next to the cylinder
to the specified torque.
