![background image](http://html1.mh-extra.com/html/daytona/c896cmll/c896cmll_user-manual_3929960018.webp)
17
◇
It must be professional staff to use the original spare parts do the timely replacement of
damaged parts. The safety device (safety valve, control valve) of the unauthorized
removal or replacement is a violation of state regulations on work safety. (
Note:
the
manufacturer is not responsible for damage caused by the parts of other manufacturer and
the damage caused by the disassembling of the safety device).
5.1.2
Tending
17
◇
Regular use of diesel oil to clean Center Spindle to prevent the formation of dirt. Coat
fixing clamps rail with lubricant oil.
◇
As shown in Picture 15-A, control oil mist level in the Oil Drier. If the oil level is lower,
you need to unscrew the Oil Drier cover F, and then as figure 15-A, add some oil.
When stepping the pedal 3 to 4 times, check whether there is oil drops into the oil cup F, if
not, adjust screw D.
◇
As shown in Picture 15-C, machine motor is not powerful enough, adjust the triangle belt
of the motor by the following steps: (before any operation, cut off the power)First,
Unscrew the 4 screws on the side of the box, remove the left side protective plate of the
tire changer. Second, use special adjustment screw X (Figure 15-C) that is in the motor
support base to adjust the triangle belt.
Picture 15-A
Picture 15-B
Picture 15-C
Summary of Contents for C896CMLL
Page 20: ...7 0 Explosive View ...