![background image](http://html1.mh-extra.com/html/daytona/c896cmll/c896cmll_user-manual_3929960017.webp)
16
◇
The burst of tires may cause severe damages to the operator or even death.
◇
Before getting inflated, check whether tires are damaged.
◇
Keep tires fixed in Center Spindle while getting inflated. If greater inflation pressure is
needed, professional protector cage for tire inflation is recommended for safety. Take the
following steps to use fixed inflation box to inflate.
①
Connect the inflation nozzle to the tire valve
(
As shown in Picture 14).
②
Confirm tire diameter is consistent with the diameter of its rim.
③
Step the Inflation Pedal and begin inflation. During this procedure control the pressure of
in Inflation Box until the tire fits to the rim
④
Continue to inflate, and do always pay attention to Inflation Box pressure until the pressure
reaches the specified value of the tire. (Note: use the inflated gun to inflate the tire, regularly
check the pressure of the inflation gauge).
Picture 14
Maintenance, storage and scrap
5.1
Maintenance
5.1.1
Maintenance
◇
Prohibit unauthorized personnel for maintenance operation. To extend the service life of
the tire changer, maintenance should be performed according to the requirements of the
manual. If the machine is not maintained regularly, the operation and reliability can not
be guaranteed, and even cause danger to the operator or the people in the vicinity of the
machine. The manufacture will not be responsible for the accidents or results caused by
lack of regularly maintenance. Before any maintenance operation, circuit and gas supply
device must be disconnected ,turn off the switch. In order to release the pressure of the
air from the line, it is necessary to press the pedal 3-4 times.
Summary of Contents for C896CMLL
Page 20: ...7 0 Explosive View ...