![background image](http://html1.mh-extra.com/html/daytona/c896cmll/c896cmll_user-manual_3929960013.webp)
12
Operation Declaration
4.1
Operating notes
◇
Ensure the connection to air supply, ensure there is no air leakage, and ensure the operation space can
meet the requirements before operation.
◇
Before any operation, the air in tires must be totally driven out, and the balance block of the tire balancing
device must be removed.
4.2
Demount and Mount Tires Operation Procedure
4.2.1
◇
Check whether the air inside of tires has been totally driven out. If not, please drive air out completely.
◇
As shown in Picture 9 and Picture 9-A, press tire with the wheel Disk and step the Motor Pedal to smear
the lubricating oil.
Picture 9
Picture 9-A
4.2.2
Demount tires
◇
After bead breaking, the rim edge should be coated with
special lubricant. Fix tires in Center Spindle(Y) and lock it with Clamp Wheel (
Note
:
Make sure tires has locked tightly by Clamp Wheel). Shown as Picture 8-F, 8-G.
Picture 8-F
Picture 8-G
Summary of Contents for C896CMLL
Page 20: ...7 0 Explosive View ...