8
4. Indication and use of wheel balancer
4.1
.
DYN (Standard/Default) mode
4.1.1. Clean wheel, take off counterweights, check pressure of wheel.Choose the way of installation according to the type
of wheel.
Main shaft-wheel— Main shaft-suitable cone(big head towards inside)
suitable cone( small head towards inside)—quick handle nut —wheel—quick handle nut
Attention
:
May add a wheel, and hold the wheel to help install the thread hub. When installing or taking off wheel,
do not let wheel move on the shaft, to avoid scratching shaft
.
4.1.2. Turn on machine
4.1.3. Input a b d value
a
b
d
◼
Move gauge to touch edge of rim (Fig.1), read the value of distance, press
and
to change
,
set “a”
value.
◼
Use width gauge to read the value of width (Fig. 2), press
and
to change, set “b” value.
◼
Read the value of diameter (marked on the wheel), press
and
set “d” value.
Fig.1 Fig.2