5
2.2. Install
⚫
The equipment should be installed on the stable ground, not wooden pallet, otherwise not accurate.
⚫
Keep the back panel 0.6M away from the wall for good ventilation. Enough room should be left on both
sides for convenient operation.
2.3. Fix balancer to floor with screws on the bottom.
2.4. Install adaptor
The wheel balancer is supplied complete with cone type adaptor for fastening wheel with central bore. (see below
picture)
2.5. Install wheel
Clean wheel, take off counterweights, check pressure of wheel.
Choose the way of installation according to the type of wheel.
Main shaft-wheel— Main shaft-suitable cone(big head towards inside)
suitable cone( small head towards inside)—quick handle nut —wheel—quick handle nut
Attention
：
May add a wheel, and hold the wheel to help install the thread hub. When installing or taking off wheel,
do not let wheel move on the shaft, to avoid scratching shaft
.
3
．
Controls and components
No.
Item
Standard/Optiona
l
