12
comes out 00 00
，
means balancing succeed. (Fig.12)
Fig. 12
4.3.2. Use gauge head to add weight
Set SLC as ON according to 8.1
Fig. 13
Anticlockwise moving wheel slowly, until the right LED lit up full
（
The inside show is the distance from the outside
）
(Fig.14)
Fig. 14
Then turn down safe guard and press
to start spin, comes Fig. 22 means the wheel is balanced.
Fig. 22
Self-calibration of wheel balancer
Do the self-calibration whenever you think the balancer is not accurate. The 100g weight must be accurate.
Turn on balancer, install a medium size wheel (13″-15″)which can use clip-on weight, set “a b d” value, then
Step 1
Press
and hold, then press
comes
Step 2 Put down safe guard or press
start spin, after spin stop
comes
Step 3
Open the safe guard and clip a 100 gram weight on the outside
12 o’clock position, put down safe guard and press
to
start spin, after spin stop
comes
