background image

10

10.  TERMS OF WARRANTY

i)  General Liability 

ii)   Standard Warranty

•   In lieu of any warranty, condition or liability implied by law, the liability of Davis & 

Shirtliff (hereafter called the Company) in respect of any defect or failure of 
equipment supplied 

is limited to making good by

 

replacement or repair

 

(at 

the Company's discretion) defects which under proper use appear therein and 
arise solely from faulty design, materials or workmanship within a specified 
period. This period commences 

immediately after the equipment has been 

delivered to the customer

 and at its termination all liability ceases. Also the 

warranty period will be assessed

 

on the basis of the date that the Company 

is informed of the failure.

•    This  warranty  applies  solely  to  equipment  supplied  and 

no  claim  for 

consequential  damages,

  however  arising,  will  be  entertained.  Also  the 

warranty specifically excludes defects caused by fair wear and tear, the effects of 
careless handling, lack of maintenance, faulty installation, incompetence on 
the part of the equipment user, Acts of God or any other cause beyond the 
Company's reasonable control. Also, any repair or attempt at repair carried out 
by any other party 

invalidates all warranties.

General Terms

If equipment failure occurs in the normal course of service having been competently 
installed  and  when  operating  within  its  specified  duty  limits  warranty  will  be 
provided as follows:-

•  

Up to three years - The item will be replaced or repaired at no charge.

  Over  three  years,  less  than  ve  years  -  The  item  will  be  replaced  or 

repaired at a cost to the customer of 50% of the Davis & Shirtliff market 
price.

The warranty on equipment supplied or installed by others is conditional upon the 
defective unit 

being promptly returned free to a Davis & Shirtliff ofce

 and 

collected thereafter when repaired. No element of site repair is included in the 
warranty and any site attendance costs will be payable in full at standard chargeout 
rates.

Summary of Contents for ULTRASUN UFD

















Reviews: