DAYLIFF DSTEAM90, Installation & Operating Manual

Page: 19 / 24

Faulty Cause Solution
Disconnect power supply and contact
nearest Dayliff retailer
1. Circuit Board Faulty
2. Controller Faulty
3 . Fa u l t y R e l a y s o n
a c c e s s o r y c i r c u i t
board
4. Water Level Probe
S t e a m
generator is
turned off but
c o n t i n u e s
working
Turn off the steam generator manually and
press the drain button ,when the steam
generator finishes draining, the drain valve
will close , and then turn on the steam
generator.
Last cycle of draining
curtailed due to power
loss
When steam
generator is
t u r n e d o n ,
water comes
off the valve
16
7. MAINTENANCE
The single biggest problem with steam generation is the build up of scale resulting from
dissolved solids within the water. Scaling can cause the elements to fail, the water level
sensors not to function and premature failure of the O-rings resulting in leaks from
around the elements. The extent of the problem will vary according to the degree of
hardness in the local water supply.
It is recommended to use water softener.
NOTE
All commercial and domestic uses must ensure a regular maintenance routine for
descaling the generator. The frequency of this will vary according to the degree of
hardness in the local water supply and the amount of time the generator is used. Check
the water for hardness and arrange the descaling routine accordingly.
Faults arising from a failure to descale the generator are not
covered by warranty.
NOTE
Because heating and cooling cause expansion and contraction it is important to inspect
all the water and steam inlets and outlets as well as their pipes and connectors on a
regular basis to ensure there are no leaks.
Clean the filter net in the magnetic valve according to the water quality in the location.
Wiring and electrical integrity of the generator should be checked regularly at least once
a year.