4
NAME OF PARTS
8. Connecting
9. Connecting cable
10. Stop valve
pipe
Outdoor unit
Outdoor unit
Display window
Display window
NOTE:
All the pictures in this manual are for
explanation purposes only. The actual shape
of the indoor unit you purchased may be slight
different on front panel and display window.
The actual shape shall prevail.
Air inlet (
rear)
Air inlet
(side)
Air inlet
Air outlet
Air outlet
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver (inside)
7. Display window
Indoor unit
Indoor unit
Names of parts
4
3
5
2
6
1
9
10
8
7
Digital display:
Displays the temperature settings when the
air conditioner is operational.
Displays
when anti-cold air feature is
activated under heating mode.
‘CL’
Energy saving display (optional):
Displays when the energy saving
feature is activated. (Not available
when the unit does not have energy
saving mode.)
.
5
OPERATING INSTRUCTIONS
NOTE:
A guide on using the infrared remote is included in this literature package.
Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance necessary.
Manual operation
Operating temperature
Manual switch
AUTO/COOL
Mode
Temperature
Room temperature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures. If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high (over
80%)
, condensed water may drip out of the unit. Please sets the vertical air flow louver to
its maximum angle (vertically to the floor) and set HIGH fan mode.
NOTE:
Cooling operation
Heating operation
Drying operation
-10 52
14 126
-10 52
14 126
-15 24
5 75
O
O
16 C~32 C
O
O
(60.8 F~90 F)
O
O
14 C~30 C
O
O
(57.2 F~86 F)
O
O
16 C~32 C
O
O
(60.8 F~90 F)
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
When pressing this button, it will act as
ON/OFF on remote control, setting will
remain same as previous.
This switch is used for testing purposes
only. Please do not use it unless necessary.
To restore the remote controller operation,
use the remote controller directly.
CAUTION:
1
2
NOTE:
Displays
under defrosting operation.
‘dF’
Summary of Contents for Chrome
Page 8: ......
