EVENT
PRE-CONDITION
ACTION
LED STATUS
BUZZER STATUS
ACTIVITIES
POST-
CONDITION
FORCE_DATA
Any state
Move Magnet Key
to contact point of
REED SWITCH.
Buzzer beeps 1
time, move
Magnet Key away.
Blink
SKY BLUE
Beep 1 time
See FW specs
Back to previous
state
PARAMETERS_UPDATE
Any state
Move Magnet Key
to contact point of
REED SWITCH.
Buzzer beeps 1
time, hold Magnet
Key 5s.
Buzzer beeps 2
times.
Blink
PURPLE
Beep 2 times
See FW specs
Back to previous
state
6.1 RC technical details
The RF transmit power will be automatically set as the max value as allowed by the Zone.
Sigfox Radio Configuration (RC) defines the radio parameters in which the device shall operate: Sigfox operating
frequencies, output power, spectrum access mechanism, throughput, coexistence with other radio technologies, etc.
Each radio configuration includes 4 uplink classes: 0u, 1u, 2u, and 3u.
The Sigfox network globally works within the ranges from 862 to 928 MHz. But not all RCs require such a wide range of
operation.
RC1
RC2
RC3
RC4
RC5
RC6
RC7
Uplink center frequency
(MHz)
868.130
902.200
923.200
920.800
923.300
865.200
868.800
Downlink center
frequency (MHz)
869.525
905.200
922.200
922.300
922.300
866.300
869.100
Uplink data rate (bit/s)
100
600
100
600
100
100
100
Downlink data rate (bit/s)
600
600
600
600
600
600
600
NOTE:
Once sending the data to base station by the magnet key, the timer of sending time interval will be reset;
The shortest time interval between the two manual triggers is 15s. if shorter than 15s, there will be no data
sending and you will not hear the beep sound.
the push button can only be used for the first 60 seconds after powering up.