WSSFC-CAP10 is a Sigfox fuel level sensor that utilizes the 10-year experience of Daviteq in digital capacitance
measuring technique. It delivers high accuracy and stability with 0.1% of span. Ultra-low power design and smart
firmware allow the complete Wireless and Sensor package to run on 2 x AA battery 1.5V for 2-5 years with 15 minutes
updates. It can support the following regions RC1, RC2, & RC4.
Typical Applications: Monitoring fuel level and fuel consumption in fuel tanks of Genset, Boiler, Heavy equipment or
machinery...
SENSORS SPECIFICATION:
Measurement Range (mm)
Standard Range: 700, 1000, 1500, can be extended up to 4000
Accuracy / Resolution / Repeatability
±0.1% of Span / 0.1% / ±0.1% of span
Thermal drift
< +0.03% of span per 10oC
Connector
M12 male, 4-pin, Coding A
Sensor MTBF
More than 10 years
Sensor wetted materials
Aluminum and engineering plastic
Operating Temperature Range
-40 to 85 °C
Operating Humidity Range
0-100% RH
Sensor rating
IP67, outdoor
Certification
CE-Marking per EN61236-1 (with test report)
Standard accessories
Filter footer, flange, gasket, o-ring, self-tapping screws
Sigfox SPECIFICATION:
Sigfox zones
select RC1-RC2-RC4
Antenna
Internal Antenna 2 dbi
Configuration
via Downlink or offline USB cable (PC software is supplied at free)
Battery
02 x AA Type 1.5VDC
RF Module complies to
CE, FCC, ARIB
Working temperature
-40°C..+60°C (using Energizer Lithium Ultimate AA battery)
2. Introduction
3. Specification