Figure 5. Dimensions of AFD-0200
The Sigfox-Ready AFD Air/Gas flow sensor combines a wireless transmitter WSSFC-M12F-AFD and an AFD Air/Gas Flow
Sensor. Therefore, the installation will be divided into 02 parts:
+ Installation for AFD Air/Gas Flow Sensor: these steps are to make sure the device to measure correctly. Please follow
.
+ Installation for the wireless transmitter: these steps ensure the device sends data successfully. Please see below the
steps
Insert the batteries into the wireless transmitter and check the system to see whether the wireless
transmitter already sent the first message to the system. Please follow this link to learn how to
Attach the wireless transmitter to the AFD probe as below figures.
Figure 6. Complete set of WSSFC-M12F-AFD and AFD-0200
Problems with Sigfox communication like not receiving the packets...please refer to
to troubleshoot
the device.
Problems with the sensor functions like not measuring or inaccurate measuring....please refer to
to
troubleshoot the sensor part.
1.5.1 Installation
ATTENTION:
REVERSED POLARITY OF BATTERIES IN 10 SECONDS CAN DAMAGE THE SENSOR CIRCUIT!!!
1.5.2 Device calibration & configuration
2. Maintenance
2.1 Troubleshooting
