Page 30 of 52
Field Offset
Size Explanation
LOW_TEMP_IN_ALARM
6
1
Threshold is (data value – 90) °F
HIGH_TEMP_IN_ALARM
7
1
Threshold is (data value – 90) °F
LOW_TEMP_OUT_ALARM 8
1
Threshold is (data value – 90) °F
HIGH_TEMP_OUT_ALARM 9
1
Threshold is (data value – 90) °F
LOW_TEMP_ALARM
10
15
7 extra temps, 4 soil temps, 4 leaf temps
HIGH_TEMP_ALARM
25
15
7 extra temps, 4 soil temps, 4 leaf temps
LOW_HUM_IN_ALARM
40
1
Inside humidity is one byte unsigned number in decimal, such
as 100 represent 100%.
HIGH_HUM_IN_ALARM
41
1
Inside humidity is one byte unsigned number in decimal, such
as 100 represent 100%.
LOW_HUM_ALARM
42
8
First entry is the current Outside Humidity setting
HIGH_HUM_ALARM
50
8
First entry is the current Outside Humidity setting
LOW_DEW_ALARM
58
1
Threshold is (data value – 120) °F
HIGH_DEW_ALARM
59
1
Threshold is (data value – 120) °F
CHILL_ALARM
60
1
Threshold is (data value – 120) °F
HEAT_ALARM
61
1
Threshold is (data value – 90) °F
THSW_ALARM
62
1
Threshold is (data value – 90) °F
SPEED_ALARM 63
1
Current
Wind
Speed alarm. Units are MPH
SPEED_10MIN_ALARM
64
1
10 minute average Wind Speed alarm. Units are MPH
UV_ALARM
65
1
Current UV index alarm. Units are (UV Index * 10)
UV_DOSE_ALARM
66
1
Daily UV Dose alarm. Units are MEDS * 10
LOW_SOIL_ALARM
67
4
Low soil moisture alarm with unit in centibar.
HIGH_SOIL_ALARM
71
4
High soil moisture alarm with unit in centibar.
LOW_LEAF_ALARM
75
4
Low leaf wetness alarm with index 0 to 15. 0 is very dry and
15 is very wet.
HIGH_LEAF_ALARM
79
4
High leaf wetness alarm with index 0 to 15. 0 is very dry and
15 is very wet.
SOLAR_ALARM 83
2
Solar
energy
alarm with unit in watt/meter
2
.
RAIN_RATE_ALARM
85
2
Rain rate alarm is set with 0.01 inch per hour.
RAIN_15MIN_ALARM
87
2
15-minute rain alarm is set with 0.01inch resolution.
RAIN_24HR_ALARM
89
2
24-hour rain alarm is set with 0.01 inch resolution.
RAIN_STORM_ALARM
91
2
Rain storm alarm is set with 0.01 inch resolution.
ET_DAY_ALARM
93
1
Units are (0.001 inches)
5.
CALED and CALFIX data format
The "
CALED
" and "
CALFIX
" commands send and receive a block of temperature and humidity
data used to update the current display whenever the calibration offsets are changed. The format
of this data block is:
Field Offset
Size Explanation
Inside Temperature
0
2
Outside Temperature
2
2
Extra Temperature
4
14
(7 * 2)
Soil Temperatures
18
8
(4 * 2)
Leaf Temperatures
26
8
(4 * 2)
Inside Humidity
34
1
Outside Humidity
35
1
Extra Humidities
36
7
