David Golf Easy Picker BALL DISPENSER, User Manual

Page: 21 / 24

1300 790 890 www.davidgolf.com.au
21
FIGURE 16: TROUBLESHOOTING
1. If LED is flashing RED to GREEN in the “O” position turn off power for 2 minutes.
Then turn back on. This should reboot the acceptor. Check to make sure the 2 half of the ac
ceptor are closed together, open the acceptor and let the spring slam it shut.
Also, check to see if the white ribbon cable located on the back side of the acceptor is plunged
in just under the 2 red wires. If it does not correct your problems call your distributor.
2. If coin returns and No coin pulse to the timer check to see if the LED is blank, Green, Red, or
flashing. If blank check for voltage between the Yellow and black common wires. If power is
present call your distributor to get the acceptor repaired. If red or Green check to see if Gray
rotary switch is in the “O” Position, if not in the “O” position it will not accept coins.
3. If coin goes into the coin box and there is a green LED on the side of electronic mech, but there
is NO coin pulse.
Check relay opening by lifting the side cover of mechanism using your thump see picture
above Press the test push button and listen for relay opening .If relay seem to get stuck call
you distributor to get the mechanism repaired or replaced.
TEST PUSH BUTTON ROTARY SWITCH