David Golf Easy Picker BALL DISPENSER, User Manual

Page: 19 / 24

1300 790 890 www.davidgolf.com.au
19
Control Board Programming
10-2010 To February 2013
Located on page #8 figure #4 item #2
Bill Acceptor Instructions:
Place basket in opening
First insert bill(s) in acceptor
Then Press selection button ball
Display default view:
First line: Number of tokens that have been processed
Second line: Dollar amount of currency that has been processed
Note that these counts are NOT resettable
Control board is factory set for:
SM=$1.00, MED=$2.00, LG=$3.00, XLG=$4.00
To check for pricing:
Press and release the button you want to check
To set pricing:
Press and hold the button you wish to set for 5 seconds then release
Using the SM button to decrease and the MED button to increase select the dollar amount
Press the XLG button to save
Display default view:
First line: Number of tokens that have been processed
Second line: Dollar amount of currency that has been processed
Note that these counts are NOT resettable
Control board is factory set for:
Selection 1-4 not used, if no bill acceptor was installed
To check for pricing:
Press and release the button you want to check
Example: If selection SM is pressed it will show (price 1 is 1)
To set pricing and dumps:
Press and hold the button you wish to set for 5 seconds then release
Using the SM button to decrease and the MED button to increase select the dollar amount
Press the XLG button to save, and then select the number of dumps for that selection then press XLG
to save.